PN结物理特性的开放式测量实验方法研究

开放式、综合性量测实验的设计与应用,在巩固基础理论知识的同时,能够有效培养学生的动手实践能力、数据处理及分析能力,一定程度代表着大学物理实验课程的教学模式改革方向。以PN结物理特性的测量实验为例,基于通用型仪器与元器件的积木式组合,设计出简单、适用的实验电路;t=17.95℃时所采集的原始实验数据经三种模式回归分析,比较验证了PN结扩散电流与电压间遵循的玻尔兹曼分布律;计算出的玻尔兹曼常数与FD-PN-4测定仪的量测值相比,其结果说明了开放式测量实验方法的有效性。     

pH控制硫酸锰骨架的演化及其晶体结构

在DMF/H2O/CH3OH的混合体系中,反应温度为170℃,Mn SO4·4H2O盐溶液在p H=5和7的条件下,加热72小时,最终得到了结构不同的硫酸锰骨架[Mn2(SO4)3]·(H3O)2(1)和[Mn3(SO4)2(OH)2(H2O)2](2)。化合物结构通过单晶X-射线和红外光谱所表征,相应的晶胞参数:化合物1,立方晶系,空间群:P213,a=10.2009(12),V=1061.49(37)3,Goo F=1.158,Flack parameter 0.02(2),R1=0.0186(I2sigma);化合物2,四方晶系,空间群:Pbcm,a=7.3214(15),b=9.984(2),c=13.291(3),V=971.5(4)3,Goo F=1.063,R1=0.0227(I2sigma);单晶X射线分析显示化合物1是一个三维单手性硫酸锰骨架,化合物2是一个非手性羟基硫酸锰骨架。实验结果说明,p H值对硫酸锰骨架的改变起重要作用。     

Development of in-wheel sensor system for accurate measurement of wheel terrain interaction characteristics

Planetary rovers need high mobility on a rough terrain such as sandy soil, because such a terrain often impedes the rover mobility and causes significant wheel slip. Therefore, the accurate estimation of wheel soil interaction characteristics is an important issue. Recent studies related to wheel soil interaction mechanics have revealed that the classical wheel model has not adequately addressed the actual interaction characteristics observed through experiments. This article proposes an in-wheel sensor system equipped with two sensory devices on the wheel surface: force sensors that directly measure the force distribution between the wheel and soil and light sensors that accurately detect the wheel soil surface boundary line. This sensor design enables the accurate measurement of wheel terrain interaction characteristics such as wheel force distribution, wheel–soil contact angles, and wheel sinkage when the powered wheel runs on loose sand. In this article, the development of the in-wheel sensor system is introduced along with its system diagram and sensor modules. The usefulness of the in-wheel sensor system is then experimentally evaluated via a single wheel test bench. The experimental results confirm that explicit differences can be observed between the classical wheel model and practical data measured by the in-wheel sensor system.     

超音速等离子体炬的磁流体动力学数值研究

针对设计的喉径2mm、工作电流为100A的拉瓦尔喷嘴,在二维轴对称模型的基础上,对超音速等离子体炬中的流动及其外部射流进行了数值模拟。通过在阳极喷嘴内部采用基于磁矢量势的磁流体动力学模型,避免了对磁感应强度的复杂积分计算,得到了喷嘴内部多场耦合的结果及外部射流的流动状态,分析了喷嘴内部电磁场对等离子体的加速作用及射流发展过程。结果显示,等离子体经历了亚音速→跨音速→超音速的发展过程,最终获得2.3 Ma的超音速射流。研究结果为超音速等离子体炬的工业应用提供了理论基础。     

The regularity of the multiple higher-order poles solitons of the NLS equation

Based on the inverse scattering method, the formulae of one higher-order pole solitons and multiple higher-order poles solitons of the nonlinear Schrödinger equation (NLS) equation are obtained. Their denominators are expressed as , where is a matrix frequently constructed for solving the Riemann-Hilbert problem, and the asterisk denotes complex conjugate. We take two methods for proving is invertible. The first one shows matrix is equivalent to a self-adjoint Hankel matrix , proving . The second one considers the block-matrix form of , proving . In addition, we prove that the dimension of is equivalent to the sum of the orders of pole points of the transmission coefficient and its diagonal entries compose a set of basis.     

强度解调型光纤光栅温度传感实验

光纤光栅在工程上应用广泛,但由于存在解调系统复杂、成本高,尤其是需要使用光纤光谱仪等波长解调仪器,使得光纤光栅很难走入本科教学的实验课堂.本文提出了一种基于窄线宽DFB激光器的强度解调方案,极大地简化了光纤光栅传感器的解调系统,完全满足较高分辨率和实时检测的系统要求.合理安排的温度传感实验可以非常直观地展示光纤光栅的线性传感性能,使得工程化的光纤光栅传感技术轻松走进本科教学课堂,具有极高的推广和应用潜力.     

Stability of equilibrium solutions of a double power reaction-diffusion equation with a Dirac interaction

In this paper, information about the instability of equilibrium solutions of a nonlinear family of localized reaction-diffusion equations in dimension one is provided. More precisely, explicit formulas to the equilibrium solutions are computed and, via analytic perturbation theory, the exact number of positive eigenvalues of the linear operator associated to the stability problem is analyzed. In addition, sufficient conditions for blow up of the solutions of the equation are also discussed.     

Preparation and Characterization of Bhant Leaves‐derived Nitrogen‐doped Carbon and its Use as an Electrocatalyst for Detecting Ketoconazole

In this study, the electrocatalytic characteristics of nitrogen‐doped carbon (NDC) prepared from Clerodendrum Infortunatum L leaves on a glassy carbon electrode (GCE) surface was evaluated with regards to its ability to detect the electroactive drug ketoconazole (KCZ). The NDC was prepared by carrying out a simple pyrolysis of dry powder of the leaves at 850 °C. The prepared NDC was characterized using field‐emission scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy and Brunauer‐Emmett‐Teller analysis, and was then used as an electrode material. The performance of the electrochemical KCZ sensor with the NDC‐modified glassy carbon electrode (NDC/GCE) was found to be optimal when using PBS buffer at pH 3 and a concentration of 0.1 mg/ml of NDC in the conjugate with Nafion polymer. Under these conditions, the NDC/GCE displayed a KCZ detection limit of 3 μM and a linear dependence of its response on KCZ concentration over a wide range of KCZ concentrations from 47 μM to 752 μM (R²=0.9742). These results confirmed the potential of NDC as an electrocatalyst.     

Morris-Lecar系统中通道噪声诱导的自发性动作电位研究

在生物物理学中, 越来越多的现象是由于分段确定性的动力系统与连续时间马氏过程之间的耦合作用而产生的. 因为这种耦合性, 相关的数学模型更适合取为随机混合系统而不是扩散过程(基于It?随机微分方程). 本文从理论上和数值上研究了在弱噪声条件下无鞍点状态的随机混合Morris-Lecar系统中, 由通道噪声诱导的自发性放电现象. 一个动作电位的初始阶段可视为噪声诱导的逃逸事件, 其最优路径和拟势可由辅助Hamilton系统给出. 由于系统不存在鞍点, 因此可选择虚拟分界线(ghost separatrix)为阈值, 研究噪声诱导的自静息态的逃逸事件. 通过计算在阈值处的拟势, 便可发现其值有一个明显的最小值, 其作用类似于鞍点. 通过改进的Monte Carlo模拟方法, 计算了历程概率分布, 其结果对初始阶段和兴奋阶段的理论解均给出了验证. 此外, 基于前人将拟势等高线作为阈值的另一种选择, 我们对两种阈值取法的优劣性进行了比较. 最后, 本文研究了钠离子和钾离子通道噪声的不同组合对最优路径和拟势的影响. 结果表明: 钾离子通道噪声在自发性放电过程中起主导作用, 且两种噪声强度存在一个最优比例能使总的噪声强度达到最小.      

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束，在使用的振动环境中，会因弯曲应力而导致破裂，影响到飞行安全．本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究．首先在对8 mm、12 mm 无缺陷导管和含U 型缺口8 mm 导管的疲劳试验和有限元分析的基础上，得到了导管的最大拉应变-裂纹萌生寿命数据．然后采用基于强度极限和弹性模量估算法的Manson-Coffin 公式来预测导管裂纹萌生寿命．最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数，使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度．